How to configure SDM Template on Catalyst 3560-X Switch?

The WS-C3560X-24T-L Series Switches is an enterprise-class lines of stackable and standalone switches.

configure terminal

Enter global configuration mode.

Step 2

sdm prefer {access | default | dual-ipv4-and-ipv6 {default | routing | vlan} | routing | vlan}

Specify the SDM template to be used on the switch. The keywords have these meanings:

•access—Maximize system resources for ACLs.

•default—Give balance to all functions.

•dual-ipv4-and-ipv6—Select a template that supports both IPv4 and IPv6 routing.

–default—Balance IPv4 and IPv6 Layer 2 and Layer 3 functionality.

–routing—Provide maximum usage for IPv4 and IPv6 routing, including IPv4 policy-based routing.

–vlan—Provide maximum usage for IPv4 and IPv6 VLANs.

•routing—Maximize routing on the switch.

•vlan—Maximize VLAN configuration on the switch with no routing supported in hardware.

Note       Do not select a routing template when the switch is running the LAN base feature set. Although visible in the command-line help, the LAN base feature set does not support routing.

Use the no sdm prefer command to reset the switch to the default desktop template. The default template balances the use of system resources.

Step 3

end

Return to privileged EXEC mode.

Step 4

reload

Reload the operating system.

For more Cisco information please click here: 

http://www.3anetwork.com/cisco-ws-c3560x-24t-s-price_p45.html