Question:
We have installed a WS-C3750X-12S-S VWIC3-2MFT card on a
Cisco 3945 voice gateway but the router doesnt detect the card. out put is as
below;
What could be the issue?
Router Version
============
System image file is
"flash0:c3900-universalk9-mz.SPA.150-1.M.bin"
Cisco CISCO3945-CHASSIS (revision 1.0) with
C3900-SPE150/K9 with 980992K/67584K bytes of memory.
Processor board ID FCZ135070YF
2 FastEthernet interfaces
3 Gigabit Ethernet interfaces
DRAM configuration is 72 bits wide with
parity enabled.
255K bytes of non-volatile configuration
memory.
254464K bytes of ATA System CompactFlash 0
(Read/Write)
-------------------------------------------------
Device#
PID SN
-------------------------------------------------
*0
C3900-SPE150/K9 FOCxxxxxxJJ
Technology Package License Information for
Module:'c3900'
----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security None None None
uc uck9 Permanent uck9
data None None None
"show diag" output
===============
WIC Slot 1:
Unknown WAN daughter card
WIC module not supported/disabled in this
slot
Hardware Revision : 1.0
Top Assy. Part Number : 800-34658-01
Part Number : 73-13420-01
Board Revision : B0
Deviation Number : 0
Fab Version : 05
PCB Serial Number : FOC16323KSC
Version Identifier : V01
Product (FRU) Number : VWIC3-2MFT-T1/E1
Answer:
VWIC3-2MFT-T1/E1 requires minimum IOS
version 15.0(1)M3, WS-C3750X-24S-S Price
没有评论:
发表评论