Question:
I am experiencing WS-C3560X-24T-S a strange problem with a
ASR1002 router that I just
installed.thsi is a point to point link .the link is working but for
some reason the txload on interface g0/0/0 show 255/255 even though there is no traffic going over to this
router.
Thanks in advance for any suggestions !!!
Please see the below interface status for
both router.
Router#sh int gi0/0/3
GigabitEthernet0/0/3 is up, line protocol
is up
Hardware is 4XGE-BUILT-IN, address is a493.4c98.db03 (bia
a493.4c98.db03)
Description: "100Mbps LINK"
Internet address is 10.172.20.110/30
MTU
9100 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 255/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not supported
Full Duplex, 100Mbps, link type is auto, media type is T
output flow-control is on, input flow-control is on
ARP
type: ARPA, ARP Timeout 04:00:00
Last input 00:46:49, output 00:00:29, output hang never
Last clearing of "show interface" counters never
Input queue: 0/375/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5
minute input rate 7000 bits/sec, 4 packets/sec
5
minute output rate 5000 bits/sec, 2 packets/sec
17890 packets input, 9074660 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun,
0 ignored
0 watchdog, 7503 multicast, 0 pause input
10137 packets output, 2803120 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
Router#
-------------------------------------------------------------------------------------------------------------------------------------------------------------
RP/0/RSP0/CPU0:ASR-9010#sh int Gi0/0/0/13
Tue Oct 30 11:32:10.104 ist
GigabitEthernet0/0/0/13 is up, line
protocol is up
Interface state transitions: 11
Hardware is GigabitEthernet, address is 18ef.63e8.6ce7 (bia
18ef.63e8.6ce7)
Description: "100Mbps , Gi0/0/0/13"
Internet address is 10.172.20.109/30
MTU
9114 bytes, BW 100000 Kbit (Max: 100000 Kbit)
reliability 253/255, txload 0/255, rxload 0/255
Encapsulation ARPA,
Full-duplex, 100Mb/s, THD, link type is force-up
output flow control is off, input flow control is off
loopback not set,
ARP
type ARPA, ARP timeout 04:00:00
Last input 00:00:00, output 00:00:00
Last clearing of "show interface" counters 22w6d
30
second input rate 3000 bits/sec, 0 packets/sec
30
second output rate 8000 bits/sec, 3 packets/sec
665819 packets input, 159562042 bytes, 5896 total input drops
1 drops for unrecognized upper-level protocol
Received 21 broadcast packets, 99558 multicast packets
350 runts, 1154 giants, 0
throttles, 0 parity
5895 input errors, 2545 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
2154457 packets output, 748147945 bytes, 0 total output drops
Output 14647 broadcast packets, 1490193 multicast packets
0 output errors, 0 underruns, 0 applique, 0 resets
0 output buffer failures, 0 output buffers swapped out
11 carrier transitions
Answer:
This is due to the known defect -
CSCtw90305
Show interface X/Y returns output with counter
txload 255/255
which was duplicated to CSCtr15153 WS-C3560X-48T-L Price
Please use the Bug Tool Kit and verify your
the IOS is affected or not.
没有评论:
发表评论